Aml Triton Wireless Handheld Terminal Manual de usuario Pagina 45

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 44
2 - 20
USER’S GUIDE Triton Wireless Hand-held Terminal
Complete Triton Option Parameters - cont’d.
Section Setting Parameter Available Options Option Description
Scanner Setup
Type ID
1.) Disabled Do not send a type ID character
2.) AML Prex AML Type ID
*See AML Type ID Table
3.) AIM Prex AIM Type ID
*See AIM Type ID Table
1.) Disabled No termination character
2.) Tab Append ASCII Tab (0x09)
3.) CR Append ASCII Carriage Return (0x0d)
4.) LF Append ASCII Line Feed (0x0a)
5.) Fexit Append Field Exit / ASCII Vertical Tab
(0x0b)
6.) Custom Use custom character
Custom Character 1
Min: 0 (decimal ASCII) Set termination character 1 to the ASCII
decimal equivalent
Max: 255 (decimal ASCII)
Term Char 2
1.) Disabled No termination character
2.) Tab Append ASCII Tab (0x09)
3.) CR Append ASCII Carriage Return (0x0d)
4.) LF Append ASCII Line Feed (0x0a)
5.) Fexit Append Field Exit / ASCII Vertical Tab
(0x0b)
6.) Custom Use custom character
Custom Character 2
Min: 0 (decimal ASCII) Set termination character 2 to the ASCII
decimal equivalent
Max: 255 (decimal ASCII)
Scan Angle (Standard
High Speed Laser only)
1.) Narrow Set raster angle to 35 degrees
2.) Wide Set raster angle to 47 degrees
Illumination
(2-D Imager Only)
Enabled/Disabled Enable LED Illumination of bar code
LED Power
(2-D Imager Only)
1.) Off 0% LED brigtness
2.) Low 50% LED brightness
3.) High 100% LED brightness
AIM Mode
(2-D Imager Only)
1.) Disabled Disable aiming bar
2.) Concurrent Illumination LEDs on continuously,
aimer disables on exposure (NOT
RECOMMENDED DUE TO POWER
COMSUMPTION)
3.) Interlaced Illumination LEDs only on during
exposure, aimer only on in between
exposures
Vista de pagina 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 83 84

Comentarios a estos manuales

Sin comentarios