AML M3000 Guía de usuario descargar pdf (Pagina 15)

M5000 Portable Data Terminal American Microsystems, Ltd.

key to select yes. When yes is chosen, the M5000 PDT verifies your selection and returns you to

the Communications Select menu.

4. Press exit to return to the Main Menu.

Using RS-232 Serial Configuration

The M5000 PDT uses software developed by American Microsystems, Ltd. and runs on a Windows

compatible computer. With the help of M5000 Programmer software, programs or data files can be

transferred back and forth between the M5000 PDT and your host computer. Softcom can also be

utilized when uploading data to emulate keyboard input.

As pictured, the RS-232 serial interface is

established by connecting the

communications interface cable to an

available RS-232 port on the host computer

and attaching the RJ45 10-pin connector

(resembles a telephone jack) to the bottom of

the M5000 PDT.

You must utilize the M5000 Programmer

software to generate and transfer custom

programs and configurations to the M5000

PDT for data collection in portable mode.

To use the M5000 PDT in RS-232 serial non-

portable mode select Non-port mode from

the Main Menu (or press N). Use Softcom to

enable RS-232 serial data to appear as

keyboard data to the PC.

Parameter settings such as baud rate, data

bits, parity, etc. are preprogrammed at the manufacturing plant. These parameter settings can be

changed through Comm. Setup (Communications Setup).

How to connect the M5000 PDT to your computer:

1. Connect the 9-pin end of the communications interface cable (RS-232) into an available RS-232

port on your computer.

2. Connect the opposite end of the communications interface cable to the RJ45 10-pin connector on

the bottom of the M5000 PDT.

Working with Softcom Software

Softcom is a memory-resident PC program that allows data received from the serial port to appear as

direct keyboard input and can be used with a bar code reader or serial output device. Softcom

supports a wide range of serial port options and also supports flow control. Flow control regulates

the incoming serial data and prevents the buffer from overflowing.

Softcom runs in the background monitoring data from the serial port. When data is read from the

serial port, the currently active application receives the data as keyboard input.

Installation & Setup for Windows

1. Insert the Softcom diskette into your floppy drive.

2. From the Windows taskbar, choose Run, type a:/setup.

3. Installation dialogs guide you through the rest of the setup process.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Comentarios a estos manuales

Sin comentarios

AML M3000 Guía de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Lectores De Códigos De Barras AML M3000